A2/B2 Microbial Lab Cabinet Laboratory Biosafety Biochemical Safety
Cabinet
Biological safety cabinet:
Biological safety cabinets is clean equipment in biological
experiments, to prevent damage of the experimental operation of
poisonous and harmful airborne particles, in order to protect the
safety of the operator and the environment in the experiment.
Kenton bioaction series biological safety cabinet provide reliable
security, standard with a HEPA filter to protect product and
environment; plenum leak prevention technology, stable inflow speed
system, LCD screen, microcomputer control technology, especially
for biological contamination of a variety of high-risk experiments;
Product introduction:
●Equipped with German EBM high air flow and low energy consumption
fan, based on airflow mechanics principle, arc-shaped
large-diameter inlet design to reduce turbulence generated, to
ensure low noise operation of the system.
●Reasonable duct design, optimization of the plenum tank, with the
design of micro-shaped mesh layer outflow wind deflector,
non-convex, no dead ends, to ensure uniformity and stability of the
airflow.
●Equipped with long life exhaust HEAP and down flow ULPA,
>99.995% efficient at 0.12-micron sizes.
●BIOCASION series BSC have two types:
A2 Type:70% inner circulation, 30% exhaust.
B2 Type:100% exhaust.
Work zone width:1000mm and 1300mm
| Type of protection | BSC Selection |
| Personnel Protection, microorganisms in Risk Groups 1-3 | Class I, Class II, Class III |
| Personnel Protection, microorganisms in Risk Group 4, Glove box
laboratory | Class III |
| Personnel Protection, microorganisms in Risk Group 4, suit
laboratory | Class I, Class II |
| Product protection | Class II, Class III |
| Volatile radionuclide/chemical protection, re-circulated back to
work zone | Class II Type B1, Class II Type A2 vented to outside |
| Volatile radionuclide/chemical protection, re-circulated back to
work zone | Class I, Class II Type B2, Class III vented to outside |
SAFELOGIC™ Plenum leak-proof technology:
●Around the work zone at the top and side wall plenum design, so
that the discharge of polluting gases completely in a plenum
environment, work with indoor backplane to a molding design,
effective way to avoid the possibility of leakage.
●Equipped with the accurate pressure sensor to monitor the pressure
of the working area, where there is abnormal situation such as
breakage of the filter zone of negative pressure seal failure, the
system will automatically stop the fan running, and through sound
and light alarm prompts the operator, thus avoiding due to leakage
caused damage.
BIOCASION™ Microcomputer controller system:
●The integrated LCD screens. Display inflow/down flow speed,
pressure, filter life, failure alarm and other parameter status.
●The user-friendly design, with sterilization, lighting, interlock
function, frond window over high alarm and front window closed then
the fan shut down.
●Fan speed is adjustable according to need to adjust the
appropriate amount of fan.
STABLEFLOW™ Stable fan speed system:
●High air flow fan, the system will automatically track and adjust
the air volume and pressure, to balance the role of compensation,
with the design of micro-shaped mesh layer outflow wind deflector,
so that more air flow stability and uniformity.
Excellent imported sensor: Air Velocity Sensor and Pressure Plenum
Sensor
●Imported air velocity sensors collect data of high precision, the
performance of corrosion-resistant, anti-interference ability.
●Real-time monitoring and control cabinet status.
●Imported pressure plenum sensor responsive, effective monitoring
the pressure of the work zone and plenum.
Ergonomically design:
●Ergonomically angled front. Increase operating comfort, reduce
work fatigue.
●Equipped with splash electrical outlet. The Weight-Balance front
window can move up and down freely.
●INSIDE lighting system to provide the best illumination angle and
brightness, reducing visual fatigue.
●Front windows with explosion-proof, anti-ultraviolet tempered
glass, to better protect the safety of the operator.
Modern manufacturing processes:
●Sheet metal parts use laser cutting and CNC bending technology.
Cold-rolled sheets use three line of acidification anti-rust
technology. Incubator surface use workmanship of spraying plastics.
Easy to clean:
●Working surface with anti-corrosion wear of SUS304 stainless steel
plate forming a seamless, leak-proof, easy cleaning use.
●Under the working surface with the drain valve, easy to clean and
emissions.
Convenient Maintenance:
●Removable combination tripod, easy to transport and move, Stand
height adjustable.
●Eversion design of the front control panel to facilitate the
electrical components, maintenance and replacement.
●In order to make the BSC able to achieve long-term safety
requirements, it is recommended that the user to clean or replace
the HEAP of the BSC in use for some time.
Technical Parameters:
| Product Model | A2-
Biological safety cabinet | B2-
Biological safety cabinet |
| A2-1000G(D) | A2-1300G(D) | B2-1000G(D) | B2-1300G(D) |
| clean rating | International standard ISO14644.1 CLASS 5(US209E,CLASS 100) |
| inflow velocity | 0.53m/s | 0.56m/s |
| down flow velocity | 0.35m/s |
| down flow velocity precision | ±0.015m/s |
| noise level(dB) | ≤65 |
| vibration | ≤3μm(X,Y,Z direction) |
| HEPA | efficiency 99.995% |
| light intensity(LX) | ≥650 |
| pressure difference range (Pa) | 0~500 |
| operate environment | environment temp.10-30℃,relative humidity under 70%, no obvious
vibration and dust |
| external dimensions(H*W*D) (mm) | 2060×1035×740 | 2060×1340×740 | 2120×1035×740 | 2120×1340×740 |
| dimension of working zone(H*W*D) (mm) | 670×965×560 | 670×1270×560 | 670×965×560 | 670×1260×560 |
| power supply | Single-phase voltage source AC220V/50HZ |
| Power(W) | 300 | 350 | 300 | 350 |
| net weight(KG) | 175 | 210 | 175 | 210 |
| gross weight(KG) | 195 | 235 | 195 | 235 |
| package size (H*W*D) (mm) | 1650×1205×910 | 1650×1510×910 | 1710×1205×910 | 1710×1510×910
|
KENTON®
KENTON APPARATUS LTD. Was found in 1999, production plant was set
in Guangzhou,China.It is mainly engaged in production,sales and
export of laboratory thermostatic equipment and biological
scientific equipment,and has provided high-quality products and
services for professional laboratories and scientific
research.institutions at domestics and abroad for many years.
We relies on an international professional R & D team to keep the
design and technology of products in step with the world and
constantly seek breakthroughs.
Since its establishment, the company has been focusing on
thermostatic equipment products in related fields. Now it is a
high-tech enterprise integrating science, industry and trade. Its
business covers China, Southeast Asia, America, Europe, Australia
and other countries.
At the same time, based on the business philosophy of "walking with
scientific researchers", and taking advantage of the company's
geographical advantages, the company has carried out extensive
communication and exchange with scientific researchers in different
regions for many years, and carried out long-term follow-up
services to users, constantly improving the function and quality of
products, so that products can better meet the requirements of
users.
http://www.kentonchina.com E-mail: kenton@kentonchina.com
Adds:No.6, Tongxing street, Daxiang industrial zone, Renhe town,
Baiyun district, Guangzhou China
Tel:86-020-36246586, 36247961, 36246650, 36246651
